Selection of oxygen bottle concentrator

Selection of oxygen bottle concentrator
ABB Asia Co. Ltd (Global) - gas specialist - Electric engineeering
ABB Asia Co. Ltd (Global) - gas specialist - Electric engineeering
Selection of oxygen bottle concentrator
Rate this post

General principles when choosing a donation

Usually for people with small needs, such as welding, cutting, worshiping, it is okay to use a gas cylinder. However, with larger needs such as supplying a system, one bottle is not enough. Therefore, it is necessary to choose an oxygen bottle concentrator for stable, long-term use, less need to change bottles.

Selection of oxygen bottle concentrator

Contributing structure

Usually the manifold is made from different tubes. Short installment, long array. Combine different types of rigs. In principle, the intake coil and the gas collector (collection) are not much different.

Oxygen, nitrogen, argon gas intake

The feeder is usually made of pipes 2-10m long. Connected by joints (copper, steel, stainless steel). The intake hose is usually fastened to the wall or two metal brackets together. Then there is a sturdy framing system, for the two bottles to be loaded against. See the following pictures and videos.

Selection of oxygen bottle concentrator

Arrangement of oxygen and nitrogen bottles in production workshops

In manufacturing plants, there is a need for a line, or a plant, for a particular gas. However, due to moderate demand, the factory does not need a tank or tank. the whole plant’s evaporator and air conduction system. But an air bottle doesn’t do enough. Therefore, the gas cylinder staging was born. And in this article we have discussed the experience of selecting oxygen cylinder staging.

ABB Asia Co. Ltd.  +84 902 336 426 provides the following services:

1/ New construction, installation, maintenance of substations from 22kV-110kV, underground cable 22-110kV.

2/ Repair medium voltage cabinets (RMU) 22kV- circuit breakers up to 500kV.

3/ Construction and installation of gas supply works, tanks, liquid gas tanks, supply stations, gas filling, liquefied gas

4/ Service of suction, recoverry,  filtration and filling of SF6 gas

5/ Provides ultra-pure gas, calibration gas, multi-component mixing gas up to ppm.

6/ Construction, installation and maintenance of refrigeration systems, cold rooms, clean rooms, central air conditioning systems

Leave a Reply

Your email address will not be published. Required fields are marked *